Home»
Sitemap

Sitemap

Categories:

Lifetime Silicone Gaskets

Mikuni Carb Kits

Products:

Twin 26mm Mikuni VM carb kit, a direct replacement for BMW 26mm R50, R60 factory carbs. Not for /2 m

34mm Mikuni VM, round slide, carb kit, a replacement for 40mm Bings.

Twin 32mm Mikuni VM carb kit, a replacement and upgrade for BMW 32mm factory carbs

Single 32mm Mikuni carb kit, TR6/TR7

Amal Primeir 30mm left hand carburettor.

Amal Premier 30mm right hand carburetor

Single 34mm Mikuni carb kit, TR6/TR7

Dual 30mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and one throttle cable

Amal Primier 32mm left hand carburettor.

Amal Premier 32mm right hand carburettor.

Dual 32mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and 2 throttle cables

Dual 32mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and one throttle cable

Dual 32mm Mikuni carb kit, Bonneville with coarse screw-in manifolds and two cables

Dual 30mm Mikuni carb kit, fits Bonneville with coarse screw-in manifolds and 2 throttle cables

Dual 30mm Mikuni carb kit, Bonneville with coarse screw-in manifolds and one throttle cable

Dual 32mm Mikuni carb kit, Bonneville with bolt-on manifolds and 2 throttle cables

Dual 32mm Mikuni carb kit, Bonneville with bolt-on manifolds and one throttle cable

Dual 30mm Mikuni carb kit, Bonneville with bolt-on manifolds and two throttle cable

Dual 30mm Mikuni carb kit, Bonneville with bolt-on manifolds and one throttle cable

Single 34mm Mikuni carb conversion kit (Pre Mk3), Commando

Single 34mm Mikuni carb kit, Commando Mark3, OE twist grip only

Single 34mm Mikuni carb kit, Atlas

2-to-1 manifold for Commando single carb conversion, fits 30-34mm Mikuni or Amal Mk2 carb

2-to-1 manifold for Commando single carb conversion, fits 36-40mm Mikuni or Amal Mk2 carb

2-to-1 manifold for Atlas single carb conversion, fits 30-34mm Mikuni or or Amal Mk2 carb

Flange-to-spigot adapter, fits 30-34mm Mikuni or Amal Mk2 carb

Flange-to-spigot adapter, fits 36-40mm Mikuni or Amal Mk2 carb

Gaskets, pair, for Commando or Atlas manifold

Air filter, 2 1/4" mouth, offset, 1" thick, fits 30-->34mm Mikuni or Amal Mk2 carb

Air filter, 2 1/4" mouth, offset, fits 30-34mm Mikuni or Amal Mk2 carb, 2" thick

Single cleanable K & N air filter, covers both Amal carbs on Commando

Lower Choke cables

Lever choke conversion kit

Mikuni choke conversion kit, 30---->34mm carbs, for airbox mounted choke lever

Throttle cables. for Mikuni 26 mm VM carbs

Mikuni rebuild kit, VM 36 - 38mm carbs

Mikuni seal kit, VM 30 - 34mm carbs

Minature fuel filter w/wire clamps

Float needle and seat 3.3

Mikuni stainless float bowl Allens, Mikuni VM 30 44mm carbs

Mikuni stainless steel float bowl Phillips head screws, Mikuni VM 30 - 44mm carbs

Carb to Cylinder head Rubber Connectors, Pair, 26 mm Mikuni/Bing

Throttle cables, pair, for Mikuni 30 - 34mm VM carbs.

Carb to Air Tube Rubbers. Pair, for 26mm Mikuni/Bing

Float bowl gasket, 36-->44mm VM carbs

Lower Throttle Cables, pair, for 30-->34mm VM Carbs, junction & upper cable NOT included.

Float bowl gasket, 30mm-->34mm VM carbs.

Throttle cable for single Mikuni or Amal Mk2 carbs, 35"

Throttle cable for single Mikuni or Amal Mk2 carbs, 40"

Throttle cable for single Mikuni or Amal Mk2 carbs, 45"

Throttle cable, single 30 to 34mm Mikuni, for Mark 3 with OE twist grip, 33"

Throttle cable, single 30-34mm Mikuni, for Mark 3 with OE twist grip, 38"

Throttle cable, single 30 to 34mm Mikuni, for Mark 3 with OE twist grip, 45"

Petcock to tank sealing washer

Single carb choke replacement cable for Mikuni conversion to handlebar mounted choke lever.

Fuel line fittings, 90-degree, PAIR (2), fits british petcocks and works best with 1/4" fuel line.

Brass 5/16 tee for fuel line

Mini SS hose clamps for use with 5/16"l line sold each.

Spring steel mini fuel line clamps (6)

Throttle slide for 30-->34mm Mikuni LH carbs

Throttle slide 30-->34mm Mikuni RH carbs.

Carb to engine rubber connectors, pair, 30mm to 34mm Mikunis

Clamp for rubber connectors, carb to engine 30-->34mm carbs.

Clamp for rubber connectors, carb to air-tube 30-->34mm carbs

Carb to air tube rubber connectors, pair, 30mm to 34mm Mikunis

Clamp, carb to air tube for 26mm VM carbs, sold each

Pilot jet for Mikuni VM carbs

Fuel Filter for 7mm (1/4") ID fuel line, w/clamps

Main jet for Mikuni VM carburetor

Jet needle for Mikuni 30-->38 mm VM Carbs (6DH3)

Needle jet for Mikuni 30-->38mm Carburetors.

Main jet, 26-->38mm VM carbs.

Pilot jet for Mikuni 26-->38mm VM carbs.

Needle jet for 26-->38mm Mikuni VM carbs.

Mikuni rebuild kit, 30 to 34mm VM carburetors

Mikuni 26mm gaskets and seal kit

26mm Mikuni carb kit w/2.5 float needle and seat

Jet Needle 30mm-->38mm Mikuni VM for carbs.

Clamp, carb to engine for 26mm VM carbs, sold each

Black, braided, cloth covered 7mm fuel line, per meter.

Fuel Line, black polyurethane, 1/4" ID, sold per foot

Vacuum fittings for carb synchronizing, pair.

Vacuum fittings for carb syncronization, installed.

Fuel line clamps (10) 2 collar and 8 spring, for Poly line.

1/4" Brass "T", Ideal match to 2940 petcock fittings

1/4" Black polyurethane fuel line, per foot

Clear braided 5/16 fuel line

Mikuni vent tubbing, clear. per foot

Mikuni vent tubing translucent green. per foot

30mm Premier Amal

32mm Primier Amal Carburetor

Amal gasket and seal kit, 900 series.

Tri-Spark electronic ignition (with self test)

180 watt alternator kit

180 Watt alternator kit

Boyer single phase power box w/headlight cutout

Engine coverallen screw set (30 pieces), fits T-120, 1969 - on

Engine covers & gearbox outer cover allen screw set (24 pieces), fits T-140

Engine covers & gearbox outer cover allen screw set (24 pieces), fits T-140 E-Start

Engine covers allen screw set (32 pieces), fits T-150

Engine covers allen screw set (39 pieces), fits T-160

Gearbox outer cover allen screws, fits T150 & T160

Rocker box to cylinder head nuts (6) & washers (underneath), fits T140

Bolts (4) & washers for rocker box insection cover, fits T150 & T160

Allen screws (12) & washers for rocker inspection covers, fits T140

Rocker box to cylinder haed allen screws (6) & washers, fits T150 & T160

Rocker oil feed dome nuts, 26 T.P.I., pair

Rocker Box 1/4" outer hex bolts (4) & washers, fits T150 & T160

Primary cover allens & dome nuts, T140

Dome nuts (2) for rocker oil feed banjo

Cylinder head nuts (4) & thick washers, fits T150 & T160

Carb mounting nuts (6) & washers, fits T150 & T160

Bolt locknut, & washerr for intake manifold bracket, fits T150 & T160

Carb-to-mainifold mounting nuts (2) & washers (one carb), fits Triump 500 Twins

Carb-to-manifold mounting lock nuts (4) & washers, fits T120

Allen screws & lockwashers for Amal Mark 2 carb top & float bowl (1 carb)

Crankcase sump plate lock nuts (4) & washers, fits T150

Boyer microdigital electronic ignition for Commando

Boyer high output, dual lead coil

12-volt, dual-lead, 5 ohm, high output coil

POD-Tronics soild state regulator/rectifier for high-power systems, up to 200 watts

POD-Tronics 240 watt 3 phase , 12 volt reg/rec.

Halogen tail light bulb

Halogen headlight conversion kit, flat face, Commando with 7" headlight

7" Halogen headlight kit includes flat face lens/reflector, H-4 bulb, wiring pig-tail, fits all Brit

Spark plug wire and cap, 90-degree, 5,000-ohms

Spark plug wire and cap, 90-degree, 1,000-ohms

Spark plug wire and cap, 90-degree, 0-ohms

Spark plug cap, 90-degree, 5000-ohm

Spark plug cap, 90 degree, 1000 ohm.

Spark plug cap, 90-degree, 0-ohm

2MC Start capacitor

Mounting spring for start capacitor or warning light assimilator

Mounting spring for start capacitor or warning light assimilator, polished stainless

Rocker inspection cover gaskets, pre-unit 500 & 650 Twins

Bonneville mufflers, pair

Speedmaster mufflers, pair

Speedmaster mufflers, extra long

Speedmaster mufflers, straight cut

Boyer Micro Power Blue box

Tank mounting bolts (3), nut & washer, 1950 - 69 twins

Wing nuts (2), & washers for tank mounting rubbers, /5, also will fit /6, /7

Knureled stainless nuts for tank mounts /5 /6 /7, pair

Screws (4) for tank emblems, phillips, /2, /5

Screws (4) for tank emblems, slotted, /2, /5

Subframe mounting bolts (4), nuts & washers, /5, /6, /7

Subframe mounting bolts (4) nuts & washers, R80/100 R & MYS

Polished dome nut for bolt at lift handle, /5, /6, /7, GS

Battery carrier allens (2) & washers, /5

Nuts (10) & washers (10) for battery mount, /6, /7

Rear fender mounting bolts (6), nuts & washers, /5 SWB

Rear fender mounting bolts (4), nuts & washers, /6, /7

License plate bracket mounting screws (3), nuts & washers, /5, /6, /7

Rear fender mounting bolts (6), nuts & washers, /5 LWB

Tail light & lens mounting hardware (10 pieces), /5, /6, /7

Turn signal mounting bolts (4), nuts & washers, /5, /6, /7, GS

Rear brake pedal pivot bolt /5,/6,/7 w/rear drum

Turn signal lens mounting screws (8), /5, /6, /7

Nuts & washers for 3 rear reflectors, /5, /6, /7, GS

Rear brake switch mounting screws (2) & washers, /5, /6, /7

Rear brake pedal stop bolt & nut, /5, /6, /7

Muffler mounting bolts, nuts & washers, /2, R69S

Muffler mounting allen screws (8) & washers, /5

Shock absorber top mounting bolts (2), nuts & washers, /5, /6, /7

Muffler mounting bolts (4), allen screws (4), & washers, /6, /7

Left hand bottom shock mounting bolt, thin head, thin nut & washers, /5, /6, /7

Left hand shock absorber mounting bolt

Right hand bottom shock absorber mounting nut & washer, /5, /6, /7

Right hand bottom shock absorber mounting dome nut & washer, /5, /6, /7

Center stand mounting bolts (2) & washers, /5, /6, /7 TO 9/80

Center stand mounting bolts , /7 from 9/80, R80/100 R & MYS

Passenger footrest nuts (2) & washers, /5

Passenger footrest bolts (2), nuts (4), & washers, /6, /7

Footpeg bolts (2), nuts & washers, GS

Krauser pannier bracket mounting fasteners

Saddlebag mounts, mounting bolts (3) , nuts, & washers, /6, /7

Passenger footrest bolts (2), nuts & washers, R80, R100 R & MYS

Seat hinge flat socket screws (6), /5, /6, /7

Seat lock backing plate screws (2), /5, /6, /7

Seat grab rail screws (4) & washers, /5, /6

Seat strap screws (2) & washers, /5, /6, /7

Coil mounting allens (4) & washers, /5, /6, /7

Voltage regulator mounting allens (2) & washers, /5, /6, /7

Horn mounting bolt & washer, /5, /6

Bolts, nuts & washers for horns, /7 - R100

Seat, seat cowl & handrail mounting hardware, 90S

Clamp for under-tank master cylinder /6, 7

Upper & lower triple clamp bolts (6) & washers, R80/100 R & MYS

Fork damper torque plate allen

Bottom clamp pinch nuts (2) & washers, /5

Top clamp dome nut (with hole) /5, /6, /7

Bottom clamp pinch allen (2) & washers

Pivot screw, nut, & washer for hydraulic brake lever, each, all w/handlebar m/cyl

Top clamp pinch allen, nut & washers, /6, /7

Pivot screw for clutch lever and drum brake lever

Handlebar clamp nuts (4) & washers, /5, /6, /7

Clutch & brake lever housing pinch allens (2), /6 from 9/75, /7

Handlebar clamp nuts (4), allen screws (2), nuts & washers, /6, /7

Throttle assembly cover screw, /5, /6, /7, R100

Brake & clutch lever pivot nuts (2) & washers, /5, /6, /7 with drum brake

Clutch & brake lever housing pinch allens (2), /5, /6 TO 9/75

Nuts (2) & washers for round reflectors, /5

Headlight mounting washer, polished, each (2 required /5), /5, /6, /7

Screw for headlight terminal strip, /5

Headlight mounting bolt, sold each, engine turned, (2 required for /2, /5), /5, /6, /7

Front fender and fender brackets mounting hardware, /5, /6, /7 with drum brake

Front fender, fender brackets & fork brace mounting hardware, /6 & /7 with single disc to 9/80

Front fender & fender bracket mounting hardware, R90S

Front fender mounting bolts (5), nuts, & washers, R80/100 R & MYS

Front axle pinch & washer, /5, /6, /7 with drum brake

Front axle pinch allens (2) & washers, /6, /7 with disc, GS

Front axle pinch allens (4) & washers, R80/100 R & MYS

Hub cap hex bolts (5) & washers, /5, R60/6, R60/7

Rear wheel bearing cover allens (5) & washers, /6, /7

Brake arm pinch allens (2) & washers, /5, /6, /7 with drum brake

Front brake adjuster locknut & washer, /5, /6, /7 with drum brake

Torque rod special allen, nuts & washers, /5, /6, /7 with ront drum brake

Dome nuts (4) & washers for fork brace, /6, /7

Axle nut, front or rears, /5, /6, /7

Front axle washer, /2, R69S

Front axle washer, /5, /6, /7

Front axle allen screw, R80/100 R & MYS, R80RT, R100GS

Fork drain allens (2), R80/100 R & Sealing Washers

Fork gaiter clamps (4), polished, /5, /6, /7

Front axle, 14MM, /2US, /5, R90 /6TO 9/74, R60/6 & 7

Front axle, 17MM, /6 from 9/74, /7

Front axle spacer, Stainless,m for disk brake front hubs /6, /7, R100

Rear axle pinch bolt, nut, & washers, /5, /6, /7

Rear brake arm pinch allen & washer, /5, /6, /7

Screw and washer for final drive beather cap, /5

Final drive todriveshaft housing hex nuts (4) & washers, /5, /6, /7

Rear drum brake rod, SWB

Rear drum brake rod, LWB /5, /6, /7

Final drive to driveshaft housing 12 point nuts (4) & washer all twin shock, '70 - ON

Stainless final drive breather cap kit /2, /5

Front rotor mounting allens, nuts (5) & washers for single disk, /6, /7

Front motor mounting allens (4), nuts & washers (high strenght), R80/100 R & MYS

Front rotor mounting allens (5), nuts & washers, for twin disk applications /6,/7.

Allen screws for mounting brembo 2-piston calipers halves together, pair.

Brembo caliper half(s) fasteners. A-4 80 socket heads, pair

Fairing mounting hardware, R90S

Rear brake rotor mounting bolts (5), high strenght, S, RS, RT, /7

Rear caliper mounting bolts (2) & washer, high strength, S, RS, RT, /7

14mm, polished hex head non-magnetic plug & washer fits trans & FD drain 1970 - ON

Rear caliper carrier and torque rod mounting bolts, nuts & washers (high strength), S, RS, RT, /7

12mm hex headed drive shaft drain/fill plug, non-magnetic w/sealing washer.

12mm socket headed, non-magnetic, drive shaft drain/fill plug, w/sealing washer.

16x1.5 Non-magnetic, socket head, engine/transmission plug, w/sealing washer.

18mm non-magnetic socket head plug w/sealing washer.

18mm magnetic, socket head plug for engine oil drain with crush washer

Rear axle washer, /5, /6, /7

Clamps (2) for driveshaft boot, all, 1970 - ON

Rear axle, all 1970 - ON, R65 1981 - ON (Except RS, RT AND 1979 - ON R100S)

Rear axle, 1979 - ON, R100S, & Aall RS, RT W/rear disk

Brake pipe, caliper to flexible line, left side, all with single ATE

Brake pipe, caliper to flexible line, right side, all with dual ATE

Brake caliper bleeder, 10MM, all with disk through 1984

Starter motor cover, front cover, and timing chain cover allen screws , /5, /6, /7

Starter motor cover, front cover, and timing chain cover all screws (13), R80/100 R & MYS

All hardware under the front cover, 34 Pieces, /5, /6, /7

Starter motor cover, front cover, and timing chain cover allen screws (13), R100

Starter motor & breather hardware, 18 pieces, /5, /6, /7

Cylinder base nuts (8), 1955-69 Twins

Crankcase/Transmission joint hardware, 11 pieces, /5, /6, /7

Crankcase/transmission joint hardware, 13 pieces, R80/100 R & MYS

Transmission rear cover nuts & washers, /5

Shift lever allen screw, /6, /7

Transmission rear cover dome nuts & washers, /5

Transmission rear cover allen screws '74 - ON

Kickstarter & shifter nuts & washers, /5

Valve cover center nuts (2) & washers, polished, 1950-ON

Valve cover small nuts (4) & washers, 1950 - ON

Cylinder head nuts & special washers, 4 sets BMW twins,1970 - ON

Carb top slotted screws (4), fits cv carbs

Carb top phlips screws (4) fits cv carbs.

Exhaust crossover Allen screws, nuts, & washers, /5, /6, /7

Carb choke body slotted screws (4), fits cv carbs

Carb choke body philips screws (4), fits cv carbs

Oil pan oil allen screws (14) & washers, all, 1970 - ON

Oil pan bolts (14) & washers, allL, '70 - ON

Oil filter cover hex bolts (3) & washers, /5, /6, /7

Oil filter cover allen (3) & washers, /5, /6, /7

Battery ground strap breather bolt (on transmission), All, '70 on

Choke lever screw, nut, & washer (on air filter cover), /5, /6, /7

Nuts for engine mounting studs (4) & washers, all, 1970 - ON

Carb top screws, (4) slotted, all w/flat top cv carbs

Carb top screws, (4) philips, all w/flat top cv carbs

Oil filter allen screws (3) & washers, R80/100 R&MYS

Clutch operating lever pivot bolt, nut, & washer, R80/100 R & MYS

Oil pan mounting bolts & washers (12), 1959-69 TWINS

Carb top screws, (4) phillips, all w\flat top cv carbs

12mm Polished hex head non-magnetic plug for drive-shaft fill/drain, with sealing washer.

Cotterpin for clutch actuating lever pivot (on back of transmission), /5

Stainless steel clamp, fits carb to engine w/ 32mm OE or Mikuni carbs, each, /5, /6, /7

Stainless steel clamp, fits OE air tubes, each /5,/6./7

Pushrod tubes, polished stainless, set of 4, R50/2, R60/2

Pushrod tubes, polished stainless, set of 4, R69S

Pushrod tubes, polished set of, 4, /5, /6, TO 9/74

Pushrod tubes, stainless polished, set of 4, 1976 - ON, except R45/65

Stainless steel tapered pin for kickstarter w/nut & washer.

Stainless steel tapered pin for gear shift lever w/nut & washer.

Engine mounting stud, front, /5 - R100

Engine mounting stud, rear, /5 - R100

Mufflers, pair, /6, /7 style, fits /5, /6, /7, R100 w/38mm pipes

Mufflers, pair, /5 style, fits /5, /6, /7, R100 w/38mm pipes

Mufflers, pair, /2

Mufflers, pair, R45, R65, &LS

Head pipes, pair, with crossover, 38mm, fits /5, /6, /7, R100

Head pipes, 38mm, double crossover, /5, /6, /7

Headpipes with nut, /2

Stainless headpipes R100/80 monolever

Muffler clamp, with bolt for 38mm systems, each.

Polished stainless steel clamp, with bolt for 40mm systems

Head pipes, pair, with crossover, fits R80 & R100 monoshock

Complete system, dual mufflers & headers, fits R1100R. Please call for quote.

H-piece replacement for collector box, fits Monoshock models

Ignition module, K-bikes

Ignition module, R bikes, BM300

Voltage regulator "R" bikes

Boyer Microdigital single plug ignition, R-bikes, 1970 to 78

Boyer Microdigital dual plug ignition, only, for dual-plugged R-bikes, 1970 to 78

Boyer Microdigital dual plug ignition kit for R-bikes, 1970 to 78

2 Wire Boyer MicroDigital stator plate

Boyer red box (microdigital), only, for pre'79 R bikes

Boyer Microdigital single plug ignition, R-bikes, '79 & '80.

Boyer Microdigital dual plug ignition, only, for R bikes, '79 & '80

Boyer Microdigital dual plug ignition kit for R bikes, '79 & '80.

Spark plug wires with 5000-ohm 90 degree caps, pair.

Spark plug caps, 5000-ohm, use existing wires

Spark plug wires with 5000-ohm 90 degree caps, 4, for dual-plugged BMW

Spark plug wire with non-resistor cap

Spark plug wire with resistor cap

NGK non-resistor spark plug cap

NGK resistor spark plug cap

NGK 1,000-ohm spark plug cap

Spark plug wires, pair, w/1000 ohm 90 degree caps

Dyna high-output, dual lead coil, 5 ohm, 12-volt, use with points, includes bracket.

Dyna high-output, dual lead coil, 3 ohm, 12-volt, use with Boyer, with mounting bracket

Dyna dual lead, 1.5 ohm, coils w/brackets, pair, use with dual plugs & Boyer

Ignition switch upgrade kit, /2 & /5, with ground buss

Circuit connector for /5 switch upgrade

Key for /2, /5 upgrade switch kit, sold ea.

Replacement key switch

Key switch support ring

Halogen tail light bulb (BRIGHT!) replaces dual filament 1157 bulb

H-4 halogen headlight capsule, 60/55-watt

Valve cover gaskets, RED, pair, 1950 to 1994 twins, exc R69, R69S.

Valve cover gaskets, pair, R69, R69S

Silicone oil pan gasket, 1950 � 69 twins

Tail light lens gasket, black, Buna-N Mil-spec gasket material, /5, /6, /7

Turn signal lens gaskets, red, "O" ring type

13-Rib fork gaiters, /5, /6, /7, Pair

Footrest rubbers, round, /5 style, pair.

Handlebar grips, OE, /6 and later pattern (square), pair.

Hardware kit, stainless steel, /5 SWB

Hardware kit, stainless steel, LWB

Hardware kit, stainless steel, /6 TO 9/75

Hardware kit, stainless steel, /6 FROM 9/75

Clutch rod oil seal, keeps transmission oil in the transmission.

Clamp, carb to engine for 26mm VM set-ups, sold each.

Transmission adjuster, pre Mk3, the whole shooting match

Crush washer for 10mm or 3/8" brake pipes

Amal choke blanking plug

Jetting assistance, Mikuni VM carbs

Oil Pressure gauge kit

Final Drive breather /6./7

Mikuni choke conversion kit, 30---->34mm carbs, for handlebar mounted choke lever

Rear brake pedal bolt and grease nipple, all Commando

Front disk mountingf hex bolts, nuts (5) and washers for single disk /6,/7.

Front hub mounting hex bolts, nuts (5) and washers for twin disk applications /6,/7

Spring clamps (10) for systems with cloth fuel line.

14mm non-magnetic, hex head, polished trans/FD drian plug w/sealing washer.

14mm non-magnetic,socket head, final drive/transmission drian plug w/ sealing washer.

Top clamp dome nut without hole for steering damper.

Carb to engine connectors, pair, for kits that replace 40mm Bings

Neck-up rubber bushings, pair, for Mikuni VM installations that replace 40mm Bings

Stainless hose clamps for 2945B, sold each, 4 required for both carbs, if needed.

Angle Bracket Mount Muffler to Frame, sold each.