|
Code
|
Name
|
Image
|
Price
|
Description
|
|
|
|
2101
|
MIKUNI CARB KIT, R50 & R60, 1969-ON
|
|
$400.00
|
Limited availability. Kit contains two Mikuni VM26 carbs jetted for your motorcycle, carb-to-head connectors with stainless clamps, carb-to-air tube connectors with stainless clamps, fuel line, extra main and pilot jets, throttle cables, and instructions. This kit utilizes the stock air filter. Fits R50 & R60 /5, /6, /7.
|
|
2103
|
TWIN MIKUNI ROUND-SLIDE CARB KIT, R65 - R100 WITH 32MM CARBS
|
|
$439.00
|
LIMITED QUANTITIES!
TWIN MIKUNI 32MM CARB KIT CONTAINS TWO PRE-JETTED VM32 CARBS, THROTTLE CABLES, CARB-TO-HEAD CONNECTORS WITH STAINLESS CLAMPS, CARB-TO-AIR TUBE CONNECTORS WITH STAINLESS CLAMPS, FUEL LINE WITH STAINLESS CLAMPS, EXTRA MAIN JETS, AND EXTRA PILOT JETS. THE STOCK AIR TUBES AND AIR FILTER ARE USED. FITS ALL R65 - R100 WITH 32MM CARBS.
|
|
2319
|
Single 32mm Mikuni carb kit, TR6/TR7
|
|
$329.95
|
NOT CURRENTLY AVAILABLE
Single 32mm Mikuni carb kit contains pre-jetted carb, manifold, adaptor, throttle cable, air filter, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits TR6 and TR7. Stock air filters and side covers will not work on O.I.F models, use # 2999 sidecover set. Consider the cable-operated choke kit, part #2900 and #2938 whcih allow the use of the stock handlebar-mounted choke lever with the Mikuni carb.
|
|
2320
|
Single 34mm Mikuni carb kit, TR6/TR7
|
|
$299.95
|
Single 34mm Mikuni carb kit contains pre-jetted carb, manifold, adaptor, throttle cable, air filter, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits TR6 and TR7. Stock air filters and side covers will not work on O.I.F models, use # 2999 sidecover set. Consider the cable-operated choke kit, part #2900 and #2938 whcih allow the use of the stock handlebar-mounted choke lever with the Mikuni carb.
|
|
2339/1
|
Dual 30mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and one throttle cable
|
|
$369.95
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, fine-thread screw-in manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '64 - '68 Bonneville with coarse screw-in manifolds and 1-to-2 throttle cables.
|
|
2340
|
Dual 32mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and 2 throttle cables
|
|
$369.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, fine-thread screw-in manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '64 - '68 Bonneville with fine screw-in manifolds and 2 throttle cables.
|
|
2340/1
|
Dual 32mm Mikuni carb kit, Bonneville with fine thread screw-in manifolds and one throttle cable
|
|
$354.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, fine-thread screw-in manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '64 - '68 Bonneville with fine screw-in manifolds and 1-to-2 throttle cables.
|
|
2350
|
Dual 32mm Mikuni carb kit, Bonneville with coarse screw-in manifolds and two cables
|
|
$369.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, coarse-thread screw-in manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '69 - '72 Bonneville with coarse screw-in manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2359
|
Dual 30mm Mikuni carb kit, fits Bonneville with coarse screw-in manifolds and 2 throttle cables
|
|
$334.95
|
Currentlt out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, coarse-thread screw-in manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '69 - '72 Bonneville with coarse screw-in manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2359/1
|
Dual 30mm Mikuni carb kit, Bonneville with coarse screw-in manifolds and one throttle cable
|
|
$324.95
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, coarse-thread screw-in manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits '69 - '72 Bonneville with coarse screw-in manifolds and 1-to-2 throttle cable. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2360
|
Dual 32mm Mikuni carb kit, Bonneville with bolt-on manifolds and 2 throttle cables
|
|
$379.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits Bonneville with bolt-on manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2360/1
|
Dual 32mm Mikuni carb kit, Bonneville with bolt-on manifolds and one throttle cable
|
|
$0.00
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits Bonneville with bolt-on manifolds and 1-to-2 throttle cable. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2365
|
Dual 30mm Mikuni carb kit, BSA A65 with 2 throttle cables
|
|
$369.95
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits BSA A65 with bolt-on manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2365/1
|
Dual 30mm Mikuni carb kit, BSA A65 with 1 throttle cable
|
|
$350.00
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits BSA A65 with bolt-on manifolds and 1-to-2 throttle cable. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2366
|
Dual 32mm Mikuni carb kit, BSA A65 with two throttle cables
|
|
$425.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits BSA A65 with bolt-on manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2366/1
|
Dual 32mm Mikuni carb kit, BSA A65 with one throttle cable
|
|
$369.95
|
NOT CURRENTLY AVAILABLE
Dual 32mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits BSA A65 with bolt-on manifolds and 1-to-2 throttle cable. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2369
|
Dual 30mm Mikuni carb kit, Bonneville with bolt-on manifolds and two throttle cable
|
|
$354.95
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 2 throttle cables, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits Bonneville with bolt-on manifolds and 2 throttle cables. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2369/1
|
Dual 30mm Mikuni carb kit, Bonneville with bolt-on manifolds and one throttle cable
|
|
$350.00
|
Currently out of stock. Dual 30mm Mikuni carb kit, contains pre-jetted carbs, bolt-on manifolds, rubber connectors with stainless clamps, 1-to-2 throttle cable, air filters, fuel line with stainless clamps, extra main jets and extra pilot jets. Fits Bonneville with bolt-on manifolds and 1-to-2 throttle cable. Stock air filters and side covers cannot be used with this kit on O.I.F. bikes, order part #2999, T120-style sidecovers.
|
|
2372
|
Single 34mm Mikuni carb kit, India Enfield 500
|
|
$275.00
|
Single 34mm Mikuni carb kit includes manifold, adaptor, fuel line with stainless calmps, air filter, and throttle cable. Fits India Enfield 500.
|
|
2374
|
Single 34mm Mikuni carb kit, Matchless 500
|
|
$299.95
|
Limited availability. Single 34mm Mikuni carb kit includes manifold, carb-to-manifold rubber connector and stainless clamps, carb-to-air filter rubber connector and stainless clamps, throttle cable, extra main jets and extra pilot jets. Fits 1964-69 Matchless 500.
|
|
2380
|
Single 34mm Mikuni carb conversion kit, Commando
|
|
$329.95
|
Single 34mm Mikuni carb conversion kit, contains pre-jetted carb, manifold, adaptor, gaskets, hardware, fuel line, clamps, throttle cable, and air filter. Recommend using 2940 petcock adaptors. Fits all Commando through 1974. For Mark 3, use #2380M3.
|
|
2380M3
|
Single 34mm Mikuni carb kit, Commando Mark3
|
|
$329.95
|
Single 34mm Mikuni carb kit, includes 2-1 manifold, manifold adapter, pre-jetted carb, air filter, throttle cable, fuel line & clamps, gaskets, hardware, extra main and pilot jets. Recommend also using #2940 90-degree petcock adapters and 2942 left hand sidecover bracket.
|
|
2383
|
Single 34mm Mikuni carb kit, Atlas
|
|
$329.95
|
Single 34mm Mikuni carb conversion kit, contains pre-jetted carb, manifold, adaptor, gaskets, hardware, fuel line, clamps, throttle cable, and air filter. Recommend using #2940 petcock adaptors. Fits Norton Atlas*.
* YOU MUST HAVE 185mm (7 3/8") CLEARANCE FROM THE TOP OF THE INTAKE PORTS TO THE BACK OF THE AIR FILTER!
|
|
2390
|
Commando twin 32mm Mikuni kit
|
|
$0.00
|
NOT CURRENTLY AVAILABLE
Commando twin 32mm kit, contains pre-jetted carbs. manifolds, adaptors, gaskets, hardware, fuel line, clamps, throttle cable, and foam air filters. Fits all Commando
|
|
2399
|
Commando twin 30mm Mikuni kit
|
|
$459.00
|
Currently out of stock. Commando twin 30mm kit, contains pre-jetted carbs, manifolds, adaptors, gaskets, hardware, fuel line, clamps, throttle cable, and foam air filters. Fits all Commando
|
|
2401
|
Keihan 26mm carb
|
|
$150.00
|
Currently out of stock, e-mail for special order. Keihan D-slide 26mm carb, direct replacement for 26mm Amal Concentric on T100 single and dual carb models, T150/160, and BSA A75. Same dimensions as the stock carb, so you can use the original cables and air filters. Pull-up enrichener eliminates the need to tickle the carb. Made in Japan. Sold each.
|
|
2403
|
Keihan 30mm carb
|
|
$175.00
|
Currently out of stock, e-mail for special order. Keihan D-slide 30mm carb, direct replacement for 30mm Amal Concentric on T120/T140 & TR6/7 single and dual carb models, and BSA A50/65. Same dimensions as the stock carb, so you can use the original cables and air filters. Pull-up enrichener eliminates the need to tickle the carb. Made in Japan. Sold each.
|
|
2405
|
Keihan 32mm carb
|
|
$185.00
|
NOT CURRENTLY AVAILABLE
Keihan D-slide 32mm carb, direct replacement for 32mm Amal Concentric on T120/T140 & TR6/7 single and dual carb models, and BSA A50/65. Same dimensions as the stock carb, so you can use the original cables and air filters. Pull-up enrichener eliminates the need to tickle the carb. Made in Japan. Sold each.
|
|
2500
|
TR6/TR7 single carb manifold
|
|
$89.95
|
SINGLE CARB MANIFOLD FOR TRUIMPH TR6, TR7 WITH MIKUNI OR AMAL MARK 2 CARB, POLISHED ALLOY. INCLUDES GASKETS AND HARDWARE. YOU WILL ALSO NEED ONE #2560 MANIFOLD ADAPTOR. MADE IN USA.
|
|
2530
|
2-to-1 manifold for Commando single carb conversion, fits 30-34mm Mikuni or Amal Mk2 carb
|
|
$149.95
|
2-to-1 manifold, gaskets, & hardware for Commando single carb conversion, fits 30-34mm Mikuni or Amal Mk2 carb. You will also need adapter #2560
|
|
2535
|
2-to-1 manifold for Commando single carb conversion, fits 36-40mm Mikuni or Amal Mk2 carb
|
|
$149.95
|
2-to-1 manifold, gaskets, & hardware for Commando single carb conversion, fits 36-40mm Mikuni or Amal Mk2 carb. You will need adapter #2565
|
|
2536
|
2-to-1 manifold for Atlas single carb conversion, fits 30-34mm Mikuni or or Amal Mk2 carb
|
|
$149.95
|
2-to-1 manifold, gaskets, & hardware for Atlas single carb conversion, fits 30-34mm Mikuni or or Amal Mk2 carb. You will also need adapter #2560
|
|
2540
|
Manifolds (2), gaskets, & hardware for twin 30-34mm Mikuni or Amal Mk2 carbs on Commando.
|
|
$169.95
|
Manifolds (2), gaskets, & hardware for twin 30-34mm Mikuni carbs on Commando. You will need two #2560 adapters
|
|
2560
|
Flange-to-spigot adapter, fits 30-34mm Mikuni or Amal Mk2 carb
|
|
$19.95
|
Flange-to-spigot adapter, bolt holes 60mm O.C., fits 30-34mm Mikuni or Amal Mk2 carb, Norton, Triumph, BSA
|
|
2565
|
Flange-to-spigot adapter, fits 36-40mm Mikuni or Amal Mk2 carb
|
|
$19.95
|
Flange-to-spigot adapter, bolt hole spacing 70mm O.C., fits 36-40mm Mikuni or Amal Mk2 carb, Norton, Triumph, BSA
|
|
2580
|
ALLEN SCREWS FOR BSA MANIFOLD
|
|
$9.95
|
STAINLESS STEEL ALLEN HEAD SCREWS FOR BSA BOLT-ON MANIFOLDS (#2550). set of 4.
|
|
2585
|
Air filter, foam, fits 30 - 34mm Mikuni or Amal mark2 carbs
|
|
$9.95
|
Air filter, foam, fits 30 - 38mm Mikuni or Amal mark2 carbs
|
|
2586
|
Gaskets for Commando or Atlas manifold
|
|
$2.10
|
Gaskets (2) for Commando or Atlas 2-to-1 manifold or Commando twin Mikuni manifolds.
|
|
2590
|
Air filter, 2 1/4” mouth, offset, 1” thick, fits Mikuni or Amal Mk2 carb
|
|
$24.95
|
Air filter, 2 1/4” mouth, offset, 1” thick, fits 30 - 34mm Mikuni or Amal Mk2 carb
|
|
2592
|
Air filter, 2 1/4” mouth, offset, fits 30-34mm Mikuni or Amal Mk2 carb, 3” thick
|
|
$24.95
|
Air filter, 2 1/4” mouth, offset, fits 30-34mm Mikuni or Amal Mk2 carb, 3” thick. Use with single 30-34mm carb on Commando or TR6/TR7
|
|
2594
|
Single cleanable air filter, covers both Amal carbs on Commando
|
|
$24.95
|
Single cleanable air filter, covers both Amal carbs on Commando
|
|
2900
|
Lever choke conversion kit
|
|
$15.95
|
Lever choke conversion kit, allows you to use the original handlebar-mounted choke lever with the single Mikuni carb. Use with #2938 cable, Norton, Triumph, BSA
|
|
2902
|
MIKUNI CHOKE CONVERSION KIT, BMW
|
|
$39.95
|
Mikuni choke conversion kit, contains everything needed to convert the lever chokes on Mikuni 30 - 44mm round slide carbs to cable operation on BMW airheads with the choke lever on the side of the engine.
|
|
2904
|
Mikuni rebuild kit, VM 36 - 38mm carbs
|
|
$14.95
|
Mikuni rebuild kit, contains all soft parts plus float needle & seat, VM 36 - 38mm carbs
|
|
2905
|
Mikuni rebuild kit, VM 30 - 34mm carbs
|
|
$14.95
|
Mikuni rebuild kit, contains all soft parts plus float needle & seat, VM 30 - 34mm carbs
|
|
2906
|
Mikuni stainless float bowl Allens, Mikuni VM 30 – 44mm carbs
|
|
$2.95
|
Mikuni stainless float bowl screws, & lock washers (4) Allen, Mikuni VM 30 – 44mm carbs
|
|
2908
|
Mikuni stainless steel float bowl Phillips head screws, Mikuni VM 30 - 44mm carbs
|
|
$2.95
|
Mikuni stainless steel float bowl screws, & lock washers (4) Phillips head, Mikuni VM 30 - 44mm carbs
|
|
2910
|
Throttle cables for Mikuni carbs
|
|
$39.95
|
Throttle cables, pair, for Mikuni 30 - 34mm carbs on BMW's with 2 throttle cables going from the carb to twistgrip. Made in USA by Barnett.
|
|
2930
|
Throttle cable for single Mikuni or Amal Mk2 carbs, 40”
|
|
$19.95
|
Throttle cable for single 30-34mm Mikuni or Amal Mk2 carbs, 40”, Teflon/stainless, Norton, Triumph, BSA with US handlebars.
|
|
2931
|
Throttle cable for single Mikuni or Amal Mk2 carbs, 35"
|
|
$19.95
|
Throttle cable for single 30-34mm Mikuni or Amal Mk2 carbs, 35”, Teflon/stainless, Norton, Triumph, BSA with Euro handlebars.
|
|
2932
|
Throttle cable for single Mikuni or Amal Mk2 carbs, 45"
|
|
$21.95
|
Throttle cable for single 30-34mm Mikuni or Amal Mk2 carbs, 45", Norton, Triumph, BSA
|
|
2936
|
Petcock to tank sealing washer
|
|
$1.95
|
Petcock to tank sealing washer (each), Norton, Triumph, BSA
|
|
2938
|
Single carb choke cable, use with conversion kit #2900
|
|
$15.95
|
Single carb choke cable, use with conversion kit #2900, Norton, Triumph, BSA
|
|
2940
|
Fuel line fittings, 90-degree, pair, fits British petcocks
|
|
$15.95
|
Fuel line fittings; replaces the 1/4" BSP nut and straight barb fitting on your petcock with a nut and 90°, Norton, Triumph, BSA, pair
|
|
2941
|
Brass 5/16 tee for fuel line
|
|
$2.75
|
Brass 5/16 tee for fuel line
|
|
2942i
|
Bracket (stainless) to mount LH sidecover with Mikuni conversion on Mark 3, Interstate
|
|
$18.95
|
Bracket (stainless) to mount LH sidecover with Mikuni conversion on Mark 3 with Interstate tank.
|
|
2942R
|
Bracket to mount LH sidecover with Mikuni conversion (Mark 3), Roadster
|
|
$18.95
|
Bracket (stainless) to mount LH sidecover with Mikuni conversion on Mark 3 with Roadster tank.
|
|
2943
|
Stainless steel mini fuel line clamp, each
|
|
$0.95
|
Stainless steel mini fuel line clamp, each
|
|
2945
|
Rubber connector for mounting carb to cylinder head
|
|
$14.95
|
Carb to cylinder head connecting rubbers, pair, for Bing 32mm carbs or Mikuni 30 - 34mm round slide or flat slide carbs. These connectors are made from fuel filler line which is impervious to gasoline. Made by Gates in the USA.
|
|
2946
|
Clamp for carb to cylinder head connector
|
|
$2.50
|
Narrow stainless steel clamp for carb-to-cylinder head connectors, 4 required. Fits Mikuni 30, 32, 34mm carbs and stock Bing 32mm carbs, sold each.
|
|
2947
|
CLAMP FOR CARB-TO-AIR TUBE CONNECTORS
|
|
$2.50
|
Narrow stainless steel clamp for carb-to-air tube connectors, 4 required. Fits Mikuni 30, 32, 34mm carbs, each.
|
|
2948
|
Carb to air tube rubber connectors
|
|
$16.95
|
Carb to cylinder head connecting rubbers, pair, for Mikuni 30 - 34mm round slide or flat slide carbs. These connectors are made from fuel filler line which is impervious to gasoline. Made by Gates in the USA.
|
|
2962
|
Black 7mm fuel line with cloth cover
|
|
$4.00
|
Black 7mm fuel line with cloth braid (original equipment on older BMW’s), made in Germany, sold per foot
|
|
2965
|
VACUUM FITTINGS FOR CARB SYNCHRONIZERS, PAIR
|
|
$19.95
|
5mm vacuum fittings (2) for use with carburetor synchronizers. You will need a 5mm tap and appropriate drill bit for installation.
|
|
2966
|
VACUUM FITTINGS FOR CARB SYNCHRONIZERS, PAIR, INSTALLED
|
|
$34.95
|
Same as 2955, installed by Rocky Point Cycle with the purchase of a carb kit.
|
|
2972
|
Clear braided 5/16 fuel line
|
|
$1.00
|
Clear braided fuel line, per foot
|
|
4100
|
Rocky Point Cycle Tee Shirt
|
|
$0.00
|
Rocky Point Cycle Tee shirt, 99% cotton, pre-shrunk Hanes Beefy Tee. Rocky Point Cycle logo on front, shop info on rear. And, no, you cannot have my daughter's phone number.
|
|
5101
|
Exhaust rocker cover nuts, Domi & Commando
|
|
$21.95
|
Exhaust rocker cover nuts (4), original shape,fits Domi & Commando
|
|
5103
|
Exhaust rocker Allen screws, Domi & Commando
|
|
$3.25
|
Exhaust rocker Allen screws (4), replaces studs & nuts, Domi & Commando
|
|
5105
|
Inlet cover nut & washer, Domi & Commando
|
|
$8.50
|
Inlet cover nut & aluminum washer, Domi & Commando
|
|
5107
|
Cylinder head mounting bolts, Domi & Commando
|
|
$69.95
|
Cylinder head mounting bolts & thick washers (5), Domi & Commando
|
|
5109
|
Cylinder head mounting nuts, Domi & Commando
|
|
$34.95
|
Cylinder head long nuts (in fins), hex nuts (3), & washers, Commando
|
|
5111
|
Cylinder head long nuts, Commando
|
|
$25.95
|
Cylinder head long nuts (in fins), pair, Commando. These are included in part #5109.
|
|
5113
|
Rocker spindle outer plates, Norton
|
|
$19.95
|
Rocker spindle outer plates (4)polished. You will also need #5903 gaskets. Consider #5115, 5117, or 5118. Domi & Commando
|
|
5115
|
Rocker spindle plate bolts
|
|
$4.50
|
Rocker spindle plate bolts & washers (8), Domi & Commando
|
|
5115P
|
Rocker spindle plate bolts, polished
|
|
$15.95
|
Rocker spindle plate bolts & washers (8), show quality polish, fits Domi & Commando
|
|
5117
|
Rocker spindle plate Allens, Domi & Commando
|
|
$4.50
|
Rocker spindle plate bolts & washers (8), Allen, Domi & Commando
|
|
5118
|
Rocker spindle plate button head screws, Commando
|
|
$4.50
|
Rocker spindle plate button head screws (8) & washers, fits all COmmandos.
|
|
5119
|
Rocker oil feed banjo bolt, Domi & Commando
|
|
$14.95
|
Polished rocker oil feed banjo bolt with washers (each), Domi & Commando
|
|
5121
|
Goodridge braided stainless rocker feed line, Commando
|
|
$142.95
|
Goodridge braided stainless rocker feed line with stainless fittings, 3 banjo bolts, & washers, Commando
|
|
5123
|
Head steady to head mounting Allens, Commando
|
|
$14.95
|
Head steady to head mounting screws & washers (3), Allen, Commando
|
|
5124
|
BOLTS, NUTS, & WASHERS FOR HEAD STEADY PLATES
|
|
$5.95
|
Bolts (2), nuts (4), & washers for head steady plates, replaces studs & nuts, fits all Commando.
|
|
5125
|
Nuts & washers for head steady plates, Commando
|
|
$2.25
|
Nuts & washers (6) for head steady plates, Commando
|
|
5127
|
Head steady plates dome nuts & washers, Commando
|
|
$7.50
|
Head steady plates dome nuts & washers (6) (covers ends of studs), Commando
|
|
5131
|
Carburetor mounting locknuts & washers, Commando
|
|
$3.25
|
Carburetor mounting locknuts & washers (4), Commando
|
|
5133
|
Carburetor manifold mounting Allen screws & washers, Commando
|
|
$3.25
|
Carburetor manifold mounting Allen screws & washers, replaces studs & nuts, Commando
|
|
5135
|
Points cover screws, Commando
|
|
$3.95
|
Points cover screws (2), slotted, Commando
|
|
5137
|
Points cover Allen screws, Commando
|
|
$3.95
|
Points cover screws (2), Allen, Commando
|
|
5139
|
Timing cover Allen screws750/850 Commando
|
|
$9.95
|
Timing cover Allen screws (6) & washers, 750/850 Commando
|
|
5141
|
Timing cover screws
|
|
$9.95
|
Timing cover screws (12), slotted, 750/850 Commando
|
|
5143
|
Timing cover Allen screws750/850 Commando
|
|
$9.95
|
Timing cover screws (12), Allen750/850 Commando
|
|
5145
|
Timing, points, and primary cover Allen screws, Commando Mark 3
|
|
$27.95
|
Timing, points, and primary cover screws (39), Allen, Commando Mark 3
|
|
5147
|
Timing, points, gearbox outer cover & inspection cover screws, 750/850 Commando
|
|
$37.95
|
Timing, points, gearbox outer cover & inspection cover screws, slotted, 750/850 Commando
|
|
5149
|
Timing, points, gearbox outer cover & inspection cover Allen screws, 750/850 Commando
|
|
$36.95
|
Timing, points, gearbox outer cover & inspection cover screws, Allen, 750/850 Comamndo
|
|
5151
|
Timing, points, primary, gearbox outer cover & inspection cover Allen screws, Commando Mark 3
|
|
$46.95
|
Timing, points, primary, gearbox outer cover & inspection cover screws, Allen, Comando Mark 3
|
|
5153
|
Amal Concentric carb Allen screw set
|
|
$7.50
|
Amal Concentric carb Allen screw set (1 carb), includes screws & washers for float bowls & carb tops
|
|
5155
|
Air filter box access plate mounting bolts, Commando Mark 3
|
|
$2.25
|
Air filter box access plate mounting bolts & washers (3), Commando Mark 3
|
|
5157
|
Air filter box access plate mounting Allens, Commando Mark 3
|
|
$2.25
|
Air filter box access plate mounting bolts & washers (3), Allen, Commando Mark 3
|
|
5159
|
Tachometer drive screws, Commando
|
|
$0.95
|
Tachometer drive screws (2), slotted, Commando
|
|
5161
|
Tachometer drive Allen screws, Commando
|
|
$0.95
|
Tachometer drive screws (2), Allen, Commando
|
|
5163
|
Oil pressure relief valve dome nut, Domi, Commando
|
|
$24.95
|
Oil pressure relief valve dome nut, polished stainless, Domi, Commando
|
|
5165
|
Engine mounting bolts, 750/850 Commando
|
|
$24.95
|
Engine mounting bolts (5), nuts, & washers, 750/850 Commando
|
|
5167
|
Engine mounting bolts, Commando Mark 3
|
|
$24.95
|
Engine mounting bolts (5), nuts, & washers, Commando Mark 3
|
|
5169
|
Cylinder base nuts & thick washers, 24TPI, from engine #200001
|
|
$43.95
|
Cylinder base nuts & thick washers, 24TPI, from engine #200001
|
|
5171
|
Cylinder base nuts & thick washers, to engine #152000, Domi, 750 Commando
|
|
$46.95
|
Cylinder base nuts & thick washers (9), 26 TPI, to engine #152000, 26 T.P.I., Domi, 750 Commando
|
|
5173
|
Cylinder base nuts & thick washers, 850 Commando
|
|
$23.95
|
Cylinder base nuts & thick washers (5), 850 Commando
|
|
5175
|
Cylinder base studs, 24 T.P.I., 750 Commando
|
|
$69.95
|
Cylinder base studs (9), 24 T.P.I., 750 Commando. These will fit earlier Commandos with 26 T.P.I. threads if nuts #5170 are used. #
|
|
5179
|
Cylinder base studs, 850 Commando, Mark 3
|
|
$39.95
|
Cylinder base studs (5), 850 Commando, Mark 3
|
|
5181
|
Crankcase joint hardware, Domi, 750 Commando
|
|
$44.95
|
Kit includes all of the studs, nuts, washers, bolts, and screws for assembling the crankcase halves.
|
|
5183
|
Crankcase joint hardware, 850 Commando
|
|
$44.95
|
Kit includes all of the studs, nuts, washers, bolts, and screws for assembling the crankcase halves.
|
|
5185
|
Crankcase joint hardware, Commando Mark 3
|
|
$44.95
|
Kit includes all of the studs, nuts, washers, bolts, and screws for assembling the crankcase halves, fits Commando Mark 3.
|
|
5187
|
Airbox long bolts, Commando 750/850
|
|
$2.25
|
Airbox long bolts (3), & washers, fits Commando 750/850
|
|
5188
|
Air filter back plate top mounting bolt, nut, & washers
|
|
$0.95
|
Air filter back plate top mounting bolt, nut, & washers, fits 750/850
|
|
5189
|
Airbox long Allens, Commando 750/850
|
|
$2.25
|
Airbox long Allens (3), & washers, fits Commando 750/850
|
|
5200
|
Commando front master cylinder rebuild & sleeve
|
|
$195.00
|
We offer an exchange service for all Norton front master cylinders. The body is cleaned and powder coated black, and a 13mm sleeve kit is professionally installed, which gives approximately 33% more stopping power. The rebuilt master cylinder is supplied with a bleed kit and instructions. You must supply a rebuildable master cylinder.
|
|
5201
|
MAGURA 13MM MASTER CYLINDER
|
|
$94.95
|
Magura 13mm master cylinder, you will also need #5210M braided stainless brake line (the Magura fitting is metric), fits Norton, Triumph, BSA
|
|
5203
|
Brake light switch for Magura master cylinder
|
|
$6.95
|
Brake light switch for Magura master cylinder
|
|
5205
|
Magura Clutch Lever
|
|
$34.95
|
Magura dogleg clutch perch & lever, black with alloy lever. Fits all with 7/8” handlebar. Made in Germany
|
|
5207
|
Left hand combination switch, replaces Lucas switch, Norton, Triumph, BSA
|
|
$69.95
|
Left hand combination switch, replaces Lucas switch, high/low, horn, turn signals.You will also need # 5205 Magura Power Lever clutch assembly. Fits all Norton, Triumph, BSA
|
|
5210
|
BRAIDED STAINLESS BRAKE LINE
|
|
$59.95
|
BRAIDED STAINLESS BRAKE LINE, FRONT, COMMANDO, DOT-APPROVED. FITS ALL COMMANDO WITH FRONT DISC.
|
|
5210M
|
STAINLESS BRAIDED BRAKE LINE FOR MAGURA MASTER CYLINDER
|
|
$59.95
|
BRAIDED STAINLESS BRAKE LINE FOR MAGURA MASTER CYLINDER. FITS ALL COMMANDO WITH FRONT DISC. DOT-APPROVED.
|
|
5211
|
Twistgrip, all with 7/8 handlebars
|
|
$24.95
|
Twistgrip, standard, fits all 7/8" handlebars, single cable. All metal, chrome housing.
|
|
5213
|
GT handgrips, all with 7/8" handlebars
|
|
$12.95
|
GT handgrips (like the originals) fits all Norton, Triumph, BSA
|
|
5215
|
Brake line, braided stainless, Commando front, DOT-approved
|
|
$59.95
|
Brake line, braided stainless, Commando front, DOT-approved, state length
|
|
5217
|
Brake line, braided stainless, front upper, Commando Mark 3, DOT-approved
|
|
$59.95
|
Brake line, braided stainless, front upper, Commando Mark 3, DOT-approved, state length
|
|
5219
|
Brake line, braided stainless, front lower, Commando Mark 3, DOT-approved
|
|
$59.95
|
Brake line, braided stainless, front lower, Commando Mark 3, DOT-approved
|
|
5221
|
Brake line, braided stainless, rear, Commando Mark 3, DOT-approved
|
|
$59.95
|
Brake line, braided stainless, rear, Commando Mark 3, DOT-approved
|
|
5222
|
Cap for master cylinder
|
|
$52.00
|
Cap for master cylinder, polished stainless, fits pre-Mark 3 Commando
|
|
5301
|
Gearbox outer cover screws, slotted, all Nortons, 1957-on
|
|
$25.95
|
Gearbox outer cover screws, slotted (5), all Nortons, 1957-on
|
|
5303
|
Gearbox outer cover screws, Allen, all Nortons, 1957-on
|
|
$25.95
|
Gearbox outer cover screws, Allen (5), all Nortons, 1957-on
|
|
5305
|
Gearbox inspection cover screws, all Nortons, 1957-on
|
|
$3.95
|
Gearbox inspection cover screws (2), slotted, all Nortons, 1957-on
|
|
5307
|
Gearbox inspection cover Allen screws, all Nortons, 1957-on
|
|
$3.95
|
Gearbox inspection cover screws (2), Allen, all Nortons, 1957-on
|
|
5309
|
Kickstart pinch bolt, 750/850 Commando
|
|
$2.25
|
Kickstart pinch bolt & washer, 750/850 Commando. Will not fit Mark3,
|
|
5311
|
Kickstart pinch Allen, 750/850 Commando
|
|
$2.25
|
Kickstart pinch bolt & washer, Allen, 750/850 Commando. Will not fit Mark3.
|
|
5313
|
Kickstart pinch bolt, Commando Mark 3
|
|
$4.50
|
Kickstart pinch bolt & washer, thin head, Commando Mark 3
|
|
5315
|
Kickstart lever dome nut, Commando
|
|
$4.25
|
Kickstart lever dome nut, wavey washer, & washer, Commando
|
|
5317
|
Gear lever pinch bolt, Domi, 750/850 Commando
|
|
$1.95
|
Gear lever pinch bolt, nut, & washer, Domi, 750/850 Commando
|
|
5319
|
Gear lever pinch Allen, Domi, 750/850 Commando
|
|
$1.95
|
Gear lever pinch bolt, nut, & washer, Allen, Domi, 750/850 Commando
|
|
5321
|
Gear lever pinch bolt, Commando Mark 3
|
|
$1.50
|
Gear lever pinch bolt, & washer, Commando Mark 3
|
|
5323
|
Gear lever pinch Allen, Commando Mark 3
|
|
$1.50
|
Gear lever pinch bolt, & washer, Allen, Commando Mark 3
|
|
5325
|
Gearbox oil level plug, all Nortons, 1957-on
|
|
$2.50
|
Gearbox oil level plug & washer, all Nortons, 1957-on
|
|
5327
|
Gearbox drain plug, all Nortons, 1957-on
|
|
$6.95
|
Gearbox drain plug & washer, all Nortons, 1957-on
|
|
5329
|
Primary case center nut, 750/850 Commando
|
|
$10.95
|
Primary case center nut, 750/850 Commando
|
|
5331
|
Washer for primary case center nut, 750/850 Commando
|
|
$4.95
|
Washer for primary case center nut, 750/850 Commando
|
|
5333
|
Primary case oil level screw
|
|
$16.95
|
Primary case oil level screw, slotted, & o-ring
|
|
5335
|
Primary case oil drain plug, Commando Mark 3
|
|
$0.95
|
Primary case oil drain plug & washer, Commando Mark 3
|
|
5337
|
Gear pointer bolt, 750/850 Commando
|
|
$2.50
|
Bolt & washer for gear pointer, 750/850 Commando
|
|
5339
|
Gear pointer, 750/850 Commando
|
|
$11.95
|
Gear pointer, 750/850 Commando
|
|
5341
|
Gearbox bottom mounting stud, Commando
|
|
$17.75
|
Gearbox bottom mounting stud, Commando
|
|
5343
|
Nuts & washers for gearbox bottom mounting stud, Commando
|
|
$4.75
|
Nuts (2) & washers for gearbox bottom mounting stud, Commando
|
|
5345
|
Gearbox top mounting bolt, 750/850 Commando
|
|
$24.95
|
Gearbox top mounting bolt, 750/850 Commando
|
|
5347
|
Round nut for gearbox top bolt, 750/850 Commando
|
|
$17.95
|
Round nut for gearbox top bolt, 750/850 Commando
|
|
5348
|
NUT FOR GEARBOX TOP BOLT, MARK 3
|
|
$4.95
|
Nut for gearbox top bolt, Mark 3
|
|
5349
|
Spacer for top gearbox bolt, 750/850 Commando
|
|
$4.50
|
Spacer for top gearbox bolt, 750/850 Commando
|
|
5351
|
Primary chain adjuster, complete, 750/850 Commando
|
|
$49.95
|
Primary chain adjuster, complete, 750/850 Commando
|
|
5401
|
Footrest plates to frame mounting bolts, Commando
|
|
$10.95
|
Footrest plates to frame mounting bolts, nuts, & washers (4), Commando
|
|
5403
|
Footrest plates to frame mounting Allens, Commando
|
|
$10.95
|
Footrest plates to frame mounting bolts, nuts, & washers (4), Allen, Commando
|
|
5405
|
Rear master cylinder & rider’s footrest arms mounting bolts, Commando Mark 3
|
|
$7.50
|
Rear master cylinder & rider’s footrest arms mounting bolts & washers, Commando Mark 3
|
|
5407
|
Rear master cylinder & rider’s footrest arms mounting Allens, Commando Mark 3
|
|
$7.50
|
Rear master cylinder & rider’s footrest arms mounting bolts & washers, Allen, Commando Mark 3
|
|
5411
|
Rider’s footrest arms mounting bolts, 750/850 Commando
|
|
$5.50
|
Rider’s footrest arms mounting bolts, nut, & washers (replaces studs), 750/850 Commando
|
|
5413
|
Rider’s footrest arms mounting Allens, 750/850 Commando
|
|
$5.50
|
Rider’s footrest arms mounting bolts, nut, & washers (replaces studs), Allen, 750/850 Commando
|
|
5415
|
Rider’s RH footrest mounting nut (shouldered), Commando Mark 3
|
|
$5.75
|
Rider’s RH footrest mounting nut (shouldered), Commando Mark 3
|
|
5417
|
Rider’s LH footrest mounting nut, Commando Mark 3
|
|
$0.95
|
Rider’s LH footrest mounting nut, Commando Mark 3
|
|
5419
|
Footrest mounting nuts, 750/850 Commando
|
|
$1.95
|
Footrest mounting nuts (2), 750/850 Commando
|
|
5421
|
Passenger footrest lugs & bolts, Commando
|
|
$32.95
|
Passenger footrest lugs & bolts (2), Commando
|
|
5423
|
Passenger footrest pivot bolts & nuts, Commando
|
|
$0.95
|
Passenger footrest pivot bolts & nuts (2), Commando
|
|
5424
|
Passenger footrest pivot screws (button head) & nuts (2)
|
|
$0.95
|
Passenger footrest pivot screws (button head) & nuts (2), Fits all Commando
|
|
5425
|
Passenger footrest pivot screws & nuts, Allen, Commando
|
|
$0.95
|
Passenger footrest pivot screws & nuts (2)(Allen), Commando
|
|
5427
|
Passenger footrest lug spacers, Commando
|
|
$13.30
|
Passenger footrest lug spacers (2), Commando
|
|
5429
|
Rider’s footrest frame spacers, Commando
|
|
$19.95
|
Rider’s footrest frame spacers (4), Commando
|
|
5431
|
Bolts & washers for passenger footrest lugs, Commando
|
|
$2.95
|
Bolts & washers for passenger footrest lugs (2), Commando
|
|
5501
|
Fork top nuts & washers, Commando
|
|
$59.95
|
Fork top nuts & washers (2), Commando
|
|
5503
|
Steering head bearing cover, Atlas, Commando
|
|
$14.95
|
Steering head bearing cover, AtlasCommando
|
|
5505
|
Steering column nut, '71 - on Commando
|
|
$13.50
|
Steering column nut, '71 - on Commando
|
|
5507
|
Washer for steering column nut, Commando
|
|
$8.95
|
Washer for steering column nut (not tab washer - use Loctite), Commando
|
|
5509
|
Handlebar clamp Allens, Commando
|
|
$2.95
|
Handlebar clamp screws (4), Allen, Commando
|
|
5511
|
Triple clamp lower pinch Allens, '71 - on Commando
|
|
$2.95
|
Triple clamp lower pinch bolts (2), Allen, '71 - on Commando
|
|
5515
|
Front axle pinch bolt, Commando with disc
|
|
$1.95
|
Front axle pinch bolt, nut, & washer, Commando with disc
|
|
5517
|
Front axle pinch Allen, Commando with disc
|
|
$1.95
|
Front axle pinch bolt, nut, & washer, Allen, Commando with disc
|
|
5519
|
Front axle pinch bolt & washer, Commando with drum
|
|
$1.50
|
Front axle pinch bolt & washer, Commando with drum
|
|
5521
|
Front axle pinch Allen, Commando with drum
|
|
$1.50
|
Front axle pinch bolt & washer, Allen, Commando with drum
|
|
5523
|
Front fender to fender stay mounting bolts, 750/850 Commando
|
|
$3.95
|
Front fender to fender stay mounting bolts, nuts, & washers (5), 750/850 Commando
|
|
5525
|
Front fender to fender stay mounting Allens, 750/850 Commando
|
|
$2.50
|
Front fender to fender stay mounting bolts, nuts, & washers (5), Allen, 750/850 Commando
|
|
5527
|
Front fender to fender stay mounting button head screws, 750/850 Commando
|
|
$2.50
|
Front fender to fender stay mounting bolts, nuts, & washers (5), button head, 750/850 Commando
|
|
5529
|
Front fender to fender stay mounting Phillips head screws, 750/850 Commando
|
|
$2.50
|
Front fender to fender stay mounting bolts, nuts, & washers (5), Phillips head, 750/850 Commando
|
|
5531
|
Front fender to fender stay mounting bolts, Commando Mark 3
|
|
$5.95
|
Front fender to fender stay mounting bolts, nuts, & washers (8), Commando Mark 3
|
|
5533
|
Front fender to fender stay Allens, Commando Mark 3
|
|
$3.95
|
Front fender to fender stay mounting bolts, nuts, & washers (8), Allen, Commando Mark 3
|
|
5535
|
Front fender to fender stay mounting button head screws, Commando Mark 3
|
|
$3.95
|
Front fender to fender stay mounting bolts, nuts, & washers (8), button head, Commando Mark 3
|
|
5537
|
Front fender to fender stay Phillips head screws, Commando Mark 3
|
|
$3.95
|
Front fender to fender stay mounting bolts, nuts, & washers (8), Phillips head, Commando Mark 3
|
|
5539
|
Front fender stay to fork slider mounting bolts, 750/850 Commando
|
|
$1.95
|
Front fender stay to fork slider mounting bolts & washers (4), 750/850 Commando
|
|
5541
|
Front fender stay to fork slider mounting Allens, 750/850 Commando
|
|
$1.95
|
Front fender stay to fork slider mounting bolts & washers (4), Allen, 750/850 Commando
|
|
5543
|
Front fender stay to fork slider mounting bolts, Commando Mark 3
|
|
$1.00
|
Front fender stay to fork slider mounting bolts & washers (2), Commando Mark 3
|
|
5545
|
Front fender stay to fork slider mounting Allens, Commando Mark 3
|
|
$1.00
|
Front fender stay to fork slider mounting bolts & washers (2), Allen, Commando Mark 3
|
|
5547
|
Front fender bracket to fork slider mounting nuts & washers, Commando
|
|
$1.95
|
Front fender bracket to fork slider mounting nuts & washers (4), Commando
|
|
5549
|
Front fender bracket to fork slider mounting bolts, Commando
|
|
$1.95
|
Front fender bracket to fork slider mounting bolts & washers (4), replaces studs & nuts, Commando
|
|
5551
|
Front fender bracket to fork slider mounting Allens, Commando
|
|
$1.95
|
Front fender bracket to fork slider mounting bolts & washers (4), replaces studs & nuts, Allen, Commando
|
|
5553
|
Headlamp mounting bolts, washers, & thick spacers, Commando with 7" headlight
|
|
$24.95
|
Headlamp mounting bolts, washers, & thick spacers, Commando with 7" headlight
|
|
5555
|
Fork drain plugs & washers, Allen
|
|
$3.95
|
Fork drain plugs & washers, Allen
|
|
5557
|
Top & bottom clamps for accordion-style gaiters"Headlamp mounting bolts, washers, & thick spacers, C
|
|
$19.95
|
Top & bottom clamps for accordion-style gaiters (4)"Headlamp mounting bolts, washers, & thick spacers, Commando with 7" headlight
|
|
5559
|
Ignition switch console mounting bolts, Commando Mark 3
|
|
$0.95
|
Ignition switch console mounting bolts & washers (2), Commando Mark 3
|
|
5561
|
LH handlebar switch & master cylinder mounting screws, 750/850 Commando
|
|
$3.95
|
LH handlebar switch & master cylinder mounting screws, Phillips, 750/850 Commando
|
|
5563
|
LH handlebar switch & master cylinder mounting Allens, 750/850 Commando
|
|
$3.95
|
LH handlebar switch & master cylinder mounting screws, Allen, 750/850 Commando
|
|
5565
|
LH & RH handlebar switch cluster & master cylinder mounting Allens, Commando Mark 3
|
|
$6.95
|
LH & RH handlebar switch cluster & master cylinder mounting screws, Allen, Commando Mark 3
|
|
5567
|
LH & RH handlebar switch cluster screws, Commando with drum
|
|
$2.50
|
LH & RH handlebar switch cluster screws (8), Phillips"Headlamp mounting bolts, washers, & thick spacers, Commando with drum
|
|
5569
|
LH & RH handlebar switch cluster Allens, Commando with drum
|
|
$2.95
|
LH & RH handlebar switch cluster screws (8), Allen, , Commando with drum
|
|
5571
|
Pivot screw, clutch or front brake lever (drum)
|
|
$3.50
|
Pivot screw, clutch or front brake lever (drum), each, all Commando
|
|
5573
|
Hydraulic brake lever pivot bolt
|
|
$3.95
|
Hydraulic brake lever pivot bolt & nut, Mark 3
|
|
5575
|
Hydraulic brake lever pivot bolt
|
|
$3.95
|
Hydraulic brake lever pivot bolt & nut, 750/850 Commando
|
|
5601
|
Center stand bolts
|
|
$6.50
|
Center stand bolts, nuts, & washers (2)
|
|
5603
|
Center stand spring, 71 - '75 Commando
|
|
$15.95
|
Center stand spring, 71 - '75 Commando
|
|
5605
|
Side stand bolt, Commando
|
|
$12.95
|
Side stand bolt & nut, Commando
|
|
5607
|
Side stand spring, 71 - '75 Commando
|
|
$14.95
|
Side stand spring, 71 - '75 Commando
|
|
5609
|
Dome nut & washer for Zener, Commando
|
|
$0.95
|
Dome nut & washer for Zener, each, , Commando
|
|
5613
|
Dome nut, fits petrol tank mounts and silencer rubber mounts, Commando
|
|
$1.25
|
Dome nut, fits petrol tank mounts and silencer rubber mounts (each), Commando
|
|
5615
|
Locknut for petrol tank mounts and silencer rubber mounts, Commando
|
|
$0.75
|
Locknut for petrol tank mounts and silencer rubber mounts (each), Commando
|
|
5617
|
Large washers for petrol tank front rubber mounts, Commando
|
|
$2.95
|
Large washer for petrol tank front rubber mounts (2), Commando
|
|
5619
|
Coil mounting clamps, Commando
|
|
$49.95
|
Coil mounting clamps (2), polished stainless, fits all Commando
|
